DGS-6604 mm dot1x initialize
CLI Reference Guide
176
dot1x initialize
Use this command to initialize the authentication state machine of:
• a port in port-based mode.
-or-
• an associated MAC address in host-based mode.
dot1x initialize [ interface INTERFACE-ID [mac-address MAC-ADDRESS] ]
Default None
Command Mode Privileged EXEC
Usage Guideline Entering dot1x initialize without any keyword will initialize all authentication
states for all ports in port-based mode, or all MAC addresses associated in host-
base mode.
Examples This example shows how to initialize the authentication state machine on eth4.1.
This example shows how to initialize the authentication state machine associated
with MAC address 00-40-10-28-19-78 on eth4.1.
Syntax Description
interface INTERFACE-
ID
(Optional) Specifies a physical interface to initialize. In port-based mode,
initialize the authenticator state machine of a port. In host-based mode, initialize
all authenticator state machines of associated MAC addresses on this port.
mac-address
MAC-ADDRESS
(Optional) Specifies a MAC address to initialize. This option is valid only in host-
based mode. Will initialize the authenticator state machine of this assigned MAC
address on a specific port.
Switch# dot1x initialize interface eth4.1
Switch# dot1x initialize interface eth4.1 mac-address 00-40-10-28-19-78
To Next Page
Loading...
