DGS-6604 m show ip pim rp-hash
CLI Reference Guide
688
show ip pim rp-hash
Use this command to display the rendezvous point (RP) to be chosen based on
the group selected.
show ip pim rp-hash GROUP-ADDRESS
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline This command displays which RP was selected for the group specified. It also
shows whether this RP was selected by Auto-RP or the PIM Version 2 bootstrap
mechanism.
Example The following is sample output from the show ip pim rp-hash command with the
group address 239.1.1.1 specified:
Please refer to the table in the description of command show ip pim rp
mapping for the field descriptions.
Syntax Description
GROUP-ADDRESS Specifies the Group Address to display the selected RP of the group for.
Switch#show ip pim rp-hash 239.1.1.1
RP: 172.16.24.12
Info source: 172.16.24.12, via bootstrap
Uptime: 0DT1H42M15S, expires: 0DT0H2M16S
To Next Page
Loading...
