DGS-6604 m maximum-paths
CLI Reference Guide
427
maximum-paths
To control the maximum number of parallel routes that an IP routing protocol can
support, use the maximum-paths command in router configuration mode.
maximum-paths NUMBER-PATHS
Default NUMBER-PATHS: 6
Command Mode Global configuration
Usage Guideline None
Example The following example shows how to allow a maximum of 8 paths to a
destination for an Open Shortest Path First (OSPF) routing process::
Verify the settings by entering the show ip route summary command.
Syntax Description
NUMBER-PATHS Maximum number of parallel routes that an IP routing protocol installs in a
routing table; valid values are from 1 to 8.
Router(config)# maximum-paths 8
To Next Page
Loading...
