DGS-6604 ipv6 nd other-config-flag
CLI Reference Guide
343
ipv6 nd other-config-flag
This command is used to turn on the IPv6 RA (router advertisement) other
configure flag incidence per interface on this switch. The no form of this
command turns off this flag.
ipv6 nd other-config-flag
no ipv6 nd other-config-flag
Syntax None
Default other configure flag: off
Command Mode VLAN interface configuration
Usage Guideline The VLAN interface must be created first before this command can be used.
Example This example shows how to configure IPv6 other configure flag incidence:
Switch > enable
Switch # configure terminal
Switch (config) # interface vlan1
Switch (config-if) # ipv6 nd other-config-flag
Switch (config-if) #
To Next Page
Loading...
