DGS-6604 m gvrp dynamic-vlan-creation
CLI Reference Guide
213
gvrp dynamic-vlan-creation
Use the gvrp dynamic-vlan-creation command to enable dynamic VLAN
creation, and use the no form of the command to disable the dynamic VLAN
creation function.
gvrp dynamic-vlan-creation
no gvrp dynamic-vlan-creation
Syntax None
Default Disabled
Command Mode Global configuration
Usage Guideline When gvrp dynamic-vlan-creation is enabled, and a port learns a new VLAN
membership where the VLAN does not exist, the VLAN will be created
automatically. Otherwise, the newly learned VLAN will not be created.
Example This example shows how to enable dynamic VLAN creation for GVRP.
Verify the settings by entering the show gvrp configuration command.
Switch(config)# gvrp
Switch(config)# gvrp dynamic-vlan-creation
To Next Page
Loading...
