DGS-6604 m show ipv6 unicast-routing long-prefix status
CLI Reference Guide
724
show ipv6 unicast-routing long-prefix status
To display the current settings of IPv6 routes with a prefix of more than 64 bits.
show ipv6 unicast-routing long-prefix status
Syntax None
Default None
Command Mode User EXEC or any configuration mode
Usage Guideline None
Example The following displays the settings of IPv6 routes with a long prefix from the ip6-
route-longprefix status command:
Switch # show ipv6 unicast-routing long-prefix status
State : Enabled
Log : Disabled
Switch #
To Next Page
Loading...
