D-Link DGS-6600-48TS

DGS-6604 m show enable password
CLI Reference Guide
602
show enable password
Use this command to display the password of the privilege enable function
show enable password [privilege LEVEL]
Default None
Command Mode Privileged EXEC at privilege level 15 or any configuration mode at privilege level
15
Usage Guideline Issuing this command will display the password of the privilege enable function
for either or both privilege level 12 or 15.
Example This example shows how to display all of the enable passwords.
Syntax Description
privilege LEVEL (Optional) Specifies the privilege level.
Switch# show enable password
Password Encryption : Disabled
Access Level Password
-------------------------------------------------------------------
12 mypassword (Plain Text)
15 *@&cRDtpNCeBiq15KOQsKVyrA0sAiCIZQwq (Encrypted)
Total Entries: 2
Switch#