DGS-6604 m show ip ospf database network
CLI Reference Guide
664
show ip ospf database network
Use this command to display information about the network LSAs.
show ip ospf database external [LINK-STATE-ID |self-originate | adv-router IP-ADDRESS]
Default None
Command Mode User EXEC
Usage Guideline Display information about the network LSAs.
Example This is a sample output (on the next page) from the show ip ospf database
network command
Syntax Description
LINK-STATE-ID Link State ID (as an IP address).
self-originate Self-originated link states.
adv-router Displays all the LSAs of the specified router.
IP-ADDRESS Advertise router IP address.
To Next Page
Loading...
