DGS-6604 m show clock
CLI Reference Guide
585
show clock
Use this command to display the time and date information.
show clock
Syntax None
Default None
Command Mode EXEC mode or any configuration mode
Usage Guideline This command will also indicate the clock source. The clock source can be one
of "No Time Source" or "SNTP".
Example The following example shows how to display the current time:
Switch> show clock
Current Time Source : No Time Source
Current Time : 19:14:16, 2010-12-06
Time Zone : UTC -08:00
Daylight Saving Time : Recurring
Offset in Minutes : 60
Recurring From : Apr 2nd Tue 15:00
To : Oct 2nd Wed 15:30
Switch>
To Next Page
Loading...
