• Pattern: Always prefixed with _
• CallerID Pattern: Always prefixed with _
• Prepend Trunk Name: Yes/No.
• Prepend User Defined Name Enable: Yes/No.
• Prepend User Defined Name: A string.
• Alert-info: None, Ring 1, Ring 2… User should enter an Alert-info string following the values we have in
the Inbound route Alert-Info list.
• Allowed to seamless transfer: [Extension_number]
• Inbound Multiple Mode: Yes/No.
• Default Destination: By DID, Extension, Voicemail… Users should enter a Default Destination string
following the values we have in the Inbound route Default Destination list.
• Destination: An Extension number, Ring Group Extension…
• Default Time Condition.
• Mode 1: By DID, Extension, Voicemail… Users should enter a Default Destination string following the
values we have in the mode 1 Default Destination list.
• Mode 1 Destination: An Extension number, Ring Group Extension…
• Mode 1 Time Condition.
FAX with Two Media
The UCM630X supports Fax re-INVITE with multiple codec negotiation. If a Fax re-INVITE contains both T.38
and PCMA/PCMU codec, UCM630X will choose T.38 codec over PCMA/PCMU.
Blacklist Configurations
In the UCM630X, Blacklist is supported for all inbound routes. Users could enable the Blacklist feature and
manage the Blacklist by clicking on "Blacklist".
• Select the checkbox for "Blacklist Enable" to turn on the Blacklist feature for all inbound routes. Blacklist is
disabled by default.
To Next Page
Loading...
