Figure 137: Configure Inbound Rule for Fax
Now the Fax configuration is done. When there is an incoming Fax calling to the PSTN number for the FXO port,
it will send the Fax to the Fax machine.
Example Configuration for Fax-To-Email
The following instructions describe a sample configuration on how to use Fax-to-Email feature on the UCM6300.
1. Connect PSTN line to the UCM6300 FXO port.
2. Go to UCM6300 Web GUI→Call Features→Fax/T.38 page. Create a new Fax extension.