Grandstream Networks UCM630X Series - Table 128: Zohocrm Settings; Figure 268: Zohocrm Basic Settings

P a g e | 486
UCM630X Series User Manual
Version 1.0.11.10
Figure 268: ZohoCRM Basic Settings
1. Select “ZohoCRM” from the CRM System Dropdown in order to use ZohoCRM.
Table 128: ZohoCRM Settings
CRM System
Select a CRM system from the dropdown menu, four CRM systems
are available: SugarCRM, vTigerCRM, ZohoCRM (v1&v2),
Salesforce and ACT! CRM.
CRM Server Address
Enter the IP address of the CRM server.
Add Unknown Number
Add the new number to this module if it cannot be found in the
selected module.
Contact Lookups
Select from the “Available” list of lookups and press to
select where the UCM can perform the lookups on the CRM tables,
Leads, Accounts, and Contacts.
Once settings on admin access are configured:
2. Click on and .