----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
Syslog is usually for debugging and troubleshooting purpose. Turning on all levels for all syslog modules is not
recommended for daily usage. Too many syslog prints might cause traffic and affect system performance.
The reserved size for Syslog entries on the cache memory of the UCM is 50M, once this sized is reached the
UCM will clean up 2M of the oldest Syslog entries to allow to save new logs.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Network Troubleshooting
On the UCM630X, users could capture traces, ping remote host and traceroute remote host for troubleshooting
purpose under Web GUI→Maintenance→Network Troubleshooting.
The following sections shows the steps to capture different types of traffic traces for analysis purposes.
Ethernet Capture
The captured trace can be downloaded for analysis. The instructions or result will be displayed in the Web GUI
output result.
To Next Page
Loading...
Need help?
General
