To Next Page

To Previous Page

P a g e | 422

UCM630X Series User Manual

Version 1.0.11.10

Figure 227: New Parking Lot

Table 101 : Parking Lot

Parking Lot Extension

• Default Extension: 700

• During an active call, initiate blind transfer and then enter this

code to park the call.

Parking Lot Name

• Set a name to the parking lot

Parked Slots

• Default Extension: 701-720

• These are the extensions where the calls will be parked, i.e.,

parking lots that the parked calls can be retrieved.

Use Parklot as Extension

• If checked, the parking lot number can be used as extension.

The user can transfer the call to the parking lot number to park

the call. Please note this parking lot number range might conflict

with extension range.

Parking Timeout (s)

• Default setting is 300 seconds, and the maximum limit is 99.999

seconds.

• This is the timeout allowed for a call to be parked. After the

timeout, if the call is not picked up, the extension who parks the

call will be called back.

Music On Hold Classes

Select the Music on Hold Class.

Failover Destination

Configures a callback failover destination when the extension that

is called back is busy. The call will be routed to the destination

number and this reduces the chance of dropping parked calls.

Grandstream Networks UCM630X Series User Manual

Other manuals for Grandstream Networks UCM630X Series