can be anything between 0~65535, and use the outbound rule created in step 1 for the LDAP Outbound
Rule option.
Figure 173: Sync LDAP Server option
3. In case if LDAP server does not sync automatically, user can manually sync LDAP server. Under VoIP
Trunks page, click sync button shown in the following figure to manually sync LDAP contacts from peer
UCM630X.
Figure 174: Manually Sync LDAP Server
4. Under Ring Groups setting page, click “Add”. Ring Groups can be found under Web GUI→Call
Features→Ring Groups.
5. If LDAP server is synced correctly, Available LDAP Numbers box will display available remote extensions
that can be included in the current ring group. Please also make sure the extensions in the peer UCM630X
can be included into that UCM630X’s LDAP contact.
To Next Page
Loading...
Need help?
General
