12. Memory Usage
Figure 303: System Events→Alert Events Lists: Memory Usage
• Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM630X system will
send the alert.
13. External Disk Usage
Figure 304: System Events→Alert Events Lists: External Disk Usage
• Detect Cycle: The UCM630X will perform the External disk usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
• Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM630X system will
send the alert.
14. External disk status
If the external disk of the system is Connected/Disconnected, the event will be recorded in the alarm log.
15. CPU Usage Call Control
The CPU flow control threshold is defined under System Settings → General Settings, and the default value
is 90%. When the traffic exceeds the predetermined value, the event will be recorded in the alert log and new
calls will be prohibited.
16. Emergency Calls
To Next Page
Loading...
Need help?
General
