Grandstream Networks UCM630X Series User Manual

P a g e | 139
UCM630X Series User Manual
Version 1.0.11.10
Select the checkbox on the left of the parameter you would like to configure to activate the dropdown list for this
parameter.
Figure 68: Global Policy Categories
The following tables list the Global Policy configuration parameters for the SIP end device.
Table 29: Global Policy Parameters – Localization
Language settings
Language
Select the LCD display language on the SIP end device.
Date and Time
Date Format
Configure the date display format on the SIP end device’s LCD.
Time Format
Configure the time display in 12-hour or 24-hour format on the SIP end
device’s LCD.
Enable NTP
To enable the NTP service.
NTP Server
Configure the URL or IP address of the NTP server. The SIP end device
may obtain the date and time from the server.
NTP Update Interval
Configure the NTP update interval.
Time Zone
Configure the time zone used on the SIP end device.
Enable Daylight Saving Time
Select either to enable or disable the DST.

Grandstream Networks UCM630X Series Specifications

General

Brand	Grandstream Networks
Model	UCM630X Series
Category	Conference System
Language	English