Grandstream Networks UCM630X Series User Manual

P a g e | 582
UCM630X Series User Manual
Version 1.0.11.10
Figure 363: Recovery Mode
From here, the user can either upload a firmware file, factory reset or just reboot the device.
Syslog
On the UCM630X, users could dump the syslog information to a remote server under Web
GUI→Maintenance→Syslog. Enter the syslog server hostname or IP address and select the module/level for
the syslog information as well as Process Log Level.
The default syslog level for all modules is "error", which is recommended in your UCM630X settings because it
can be helpful to locate the issues when errors happen.
Some typical modules for UCM630X functions are as follows and users can turn on "NOTICE" and "VERBOSE"
levels besides "error" level.
• pbx: This module is related to general PBX functions.
• pjsip: This module is related to SIP calls.
• chan_dahdi: This module is related to analog calls (FXO/FXS).

Grandstream Networks UCM630X Series Specifications

General

Brand	Grandstream Networks
Model	UCM630X Series
Category	Conference System
Language	English