Grandstream Networks UCM630X Series User Manual

P a g e | 286
UCM630X Series User Manual
Version 1.0.11.10
Figure 125: Inbound Route - Multiple Mode Feature Codes
Inbound Route: Route-Level Mode
In the UCM630X, users can enable Route-Level Inbound Mode to switch between different destinations for each
inbound route. The inbound Route-Level mode can be enabled under Inbound Route settings.
Figure 126: Inbound Route - Route-Level Mode
The global inbound mode must be enabled before configuring Route-Level Inbound Mode. Additionally, Mode 1
must be configured as well.
When Route-Level Inbound Mode is enabled, the user can configure a “Default Destination” and a “Mode 1”
destination for each specific route. By default, the call coming into this specific inbound route will be routed to
the default destination.

Grandstream Networks UCM630X Series Specifications

General

Brand	Grandstream Networks
Model	UCM630X Series
Category	Conference System
Language	English