UCM630X Series User Manual
Version 1.0.11.10
To manually create a new FXS user, go to Web GUI→Extension/Trunk→Extensions. Click on "Add" and a
new dialog window will show for users which need to make sure first to select the extension type to be FXS
Extension before proceeding to fill in the extension information. The configuration parameters are as follows.
Table 48: FXS Extension Configuration Parameters→Basic Settings
The extension number associated with the user.
Select the FXS port to be assigned for this extension.
Configure the CallerID Number that would be applied for outbound calls from this
user.
Note: The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound rule's privilege
to make outbound calls using this rule.
Configure Voicemail.
There are three valid options, and the default option is "Enable Local Voicemail".
• Disable Voicemail: Disable Voicemail.
• Enable Local Voicemail: Enable voicemail for the user.
Configure voicemail password (digits only) for the user to access the voicemail box.
A random numeric password is automatically generated. It is recommended to use
the randomly generated password for security purposes.
Skip Voicemail
Password
Verification
When a user dials voicemail code, the password verification IVR is skipped. If
enabled, this would allow one-button voicemail access. By default, this option is
disabled.
Configures whether to send emails to the extension’s email address to notify of a new
To Next Page
Loading...
Need help?
General
