• Click to upload CSV file containing a list of devices.
• Click to export CSV file containing a list of devices. This file can be imported to another UCM
to quickly set it up with the original UCM’s devices.
• Click to copy configuration from one device to another. This can be useful for easily replacing
devices and note that this feature works only between devices of the same model.
All these operations will be detailed in the next sections.
Global Configuration
The global configuration will apply to all the connected Grandstream SIP end point devices in the same LAN with
the UCM630X no matter what the Grandstream device model it is. It is divided into two levels:
• Global Policy
• Global Templates
Note: Global Templates configuration has higher priority to Global Policy configuration.
Global Policy
Global Policy can be accessed in Web GUI→Value-added Features→Zero Config→Global Policy page. On
the top of the configuration table, users can select a category in the “Options” dropdown list to quickly navigate
to the category or they can also complete the configuration by importing/exporting. The categories are:
▪ Localization: configure display language, data, and time.
▪ Phone Settings: configure the dial plan, call features, NAT, call progress tones, etc.
▪ Contact List: configure LDAP and XML phonebook download.
▪ Maintenance: configure upgrading, web access, Telnet/SSH access, and Syslog.
▪ Network Settings: configure the IP address, QoS, and STUN settings.
▪ Customization: customize LCD screen wallpaper for the supported models.
▪ Communication Settings: configure Email and FTP settings
To Next Page
Loading...
Need help?
General
