• BANNED TYPE:
Check the IP blocked by UCM and the banned type. It supports filtering by banned
types.
• IP:
View the IP blocked by UCM, it supports IP filtering.
SSH Access
SSH switch now is available via Web GUI and LCD. Users can enable or disable SSH access directly from Web
GUI or LCD screen. For web SSH access, please log in to UCM630X web interface and go to Web GUI→System
Settings→Security Settings→SSH Access.
The "Enable SSH access" option is for system debugging. If you enable this option, the system will allow SSH
access. The SSH connection also requires the username and password of the super administrator. This option
is turned off by default. It is recommended to turn off this option when debugging is not required.
Enable the "Enable remote SSH (via GDMS)" option, the system will allow remote SSH access via the GDMS
platform. This option is turned off by default, and it is strongly recommended to turn off this option when remote
troubleshooting is not required.
Figure 36: SSH Access
Table 20: SSH Access
This option is used for system debugging. Once enabled, UCM will allow SSH
access. The SSH connection requires a super administrator's username and
password. The default setting is "No". It is recommended to set it to "No" if there is
To Next Page
Loading...
Need help?
General
