UCM630X Series User Manual
Version 1.0.11.10
The added numbers are listed here. Click on to arrange the order. Click
on to delete the number. Click on to add new numbers.
Add a new Follow Me number which could be a ‘Local Extension’ or ‘External
Number’. The selected dial plan should have permissions to dial the defined
external number.
Select the order in which the Follow Me destinations will be dialed to reach the
user: ring all at once or ring one after the other.
Click on “Follow Me Options” under Web GUI→Extension/Trunk→Extension page to enable or disable the
options listed in the following table.
Table 95: Follow Me Options
Playback Incoming
Status Message
If enabled, the PBX will playback the incoming status message before starting
the Follow Me steps.
If enabled, the PBX will record the caller’s name from the phone so it can be
announced to the callee in each step.
Playback Unreachable
Status Message
If enabled, the PBX will playback the unreachable status message to the caller
if the callee cannot be reached.