Grandstream Networks UCM630X Series - Figure 19: UCM6302 Network Interface Method: Route

P a g e | 79
UCM630X Series User Manual
Version 1.0.11.10
IP Address
Enter the IP address for static IP settings.
IP Prefixlen
Enter the Prefix length for static settings. Default is 64
DNS Server 1
Enter the DNS server 1 address for static settings.
DNS Server 2
Enter the DNS server 2 address for static settings.
• Method: Route
When the UCM630X has the method set to Route in network settings, WAN port interface is used for uplink
connection and LAN port interface is used as a router. Please see a sample diagram below.
Figure 19: UCM6302 Network Interface Method: Route
• Method: Switch
WAN port interface is used for uplink connection; LAN port interface is used as a room for PC connection.