Grandstream Networks UCM630X Series - IAX Settings;Registration

P a g e | 455
UCM630X Series User Manual
Version 1.0.11.10
IAX Settings/Registration
Table 118: IAX Settings/Registration
IAX Registration Options
Min Reg Expire
Configure the minimum period (in seconds) of registration. The default setting is
60.
Max Reg Expire
Configure the maximum period (in seconds) of registration. The default setting is
3600.
IAX Thread Count
Configure the number of IAX helper threads. The default setting is 10.
IAX Max Thread Count
Configure the maximum number of IAX threads allowed. The default is 100.
Auto Kill
If enabled and no ACK is received for new messages after the specified wait time,
the connection will be terminated.
Authentication
Debugging
If enabled, authentication traffic in debugging will not show. The default is "No".
Codec Priority
Configure codec negotiation priority. The default setting is "Reqonly".
• Caller
Consider the callers preferred order ahead of the host's.
• Host
Consider the host's preferred order ahead of the caller's.
• Disabled
Disable the consideration of codec preference all together.
• Reqonly
This is the same as "Disabled", except when the requested format is not
available. The call will only be accepted if the requested format is available.
Type of Service
Configure ToS bit for preferred IP routing.