UCM630X Series User Manual
Version 1.0.11.10
Ring All Callback on Timeout
If enabled, all registered endpoints of the extension will ring when
callback occurs. Otherwise, only the original endpoint will be called
back.
Forward to destination on
timeout
If enabled, the call will be routed to the configured destination upon
timeout. Otherwise, the call will be routed back to the original caller.
This option appears once Forward to Destination on Timeout is
enabled. Upon park timeout, the call will be routed to the configured
destination.
Parking Lot Timeout Alert-Info
Adds an Alert-Info header to parking lot callbacks after the Parking
Timeout has been reached.
Call Park
The UCM630X provides call park and call pickup features via feature code.
Park a Call
There are two feature codes that can be used to park the call.
• Feature Maps→Call Park (Default code #72)
During an active call, press #72 and the call will be parked. Parking lot number (default range 701 to 720)
will be announced after parking the call.
• Feature Misc→Call Park (Default code 700)
During an active call, initiate blind transfer (default code #1) and then dial 700 to park the call. Parking lot
number (default range 701 to 720) will be announced after parking the call.
Retrieve Parked Call
To retrieve the parked call, simply dial the parking lot number and the call will be established. If a parked call is
not retrieved after the timeout, the original extension who parks the call will be called back.
To Next Page
Loading...
Need help?
General
