Grandstream Networks UCM630X Series - Figure 138: Create Fax Extension; Figure 139: Inbound Route to Fax Extension

P a g e | 298
UCM630X Series User Manual
Version 1.0.11.10
Figure 138: Create Fax Extension
3. Go to UCM6300 Web GUI→Extension/Trunk→Analog Trunks page. Create a new analog trunk. Please
make sure "Fax Detection" is set to "No".
4. Go to UCM6300 Web GUI→Extension/Trunk→Inbound Routes page. Create a new inbound route and
set the default destination to the Fax extension.
Figure 139: Inbound Route to Fax Extension