Figure 91: Extension Details
E-mail Notification
Once the extensions are created with Email addresses, the PBX administrator can click on the button “E-mail
Notification” to send the account registration and configuration information to the user. Please make sure the
Email setting under Web GUI→System Settings→Email Settings is properly configured and tested on the
UCM630X before using “E-mail Notification”.
When clicking on ”More” > “E-mail Notification” button, the following message will be prompted on the web page.
Click on OK to confirm sending the account information to all users’ Email addresses.
Figure 92: E-mail Notification - Prompt Information
To Next Page
Loading...
Need help?
General
