SYSTEM SETTINGS
This section will explain the available system-wide parameters and configuration options on the UCM630X
series. This includes settings for the following items: General Settings, Cloud IM, HTTP server, network Settings,
OpenVPN, DDNS Settings, Security Settings, LDAP server, Time settings, Email settings, and TR-069.
General Settings
System administrators can prevent the UCM from making calls and/or writing to the data partition (e.g., CDR,
recordings, etc.) once the system reaches a specified threshold of storage usage and CPU usage respectively.
These options are located in the System Settings → General Settings page.
Figure 16: General Settings Interface
Table 5: General Settings Parameters
Used to set the threshold generated by the CPU Flow Control. When the
system CPU reaches the threshold, it will prohibit the new calls.
The default value is 90%.
Used to set a threshold to stop writing data partition. When the disk data
partition reaches the threshold configured, the data partition writing will be
stopped. The default value is 90%.
To Next Page
Loading...
Need help?
General
