UCM630X Series User Manual
Version 1.0.11.10
name (host name) in the certificate so that the TLS socket will not bind to multiple
IP addresses.
Configure the IPv6 address for TLS server to bind to. "[::]" means bind to all
interfaces. The port number is optional with default being 5061. For example,
[2001:0DB8:0000:0000:0000:0000:1428:0000]:5061. Note: The IP address must
match the common name (host name) in the certificate so that the TLS socket will
not bind to multiple IP addresses.
If enabled, the TLS server's certificate will not be verified when acting as a client.
The default setting is "Yes".
This is the CA certificate if the TLS server being connected to requires self-signed
certificate, including server's public key. This file will be renamed as "TLS.ca"
automatically.
Note: The size of the uploaded ca file must be under 2MB.
This is the Certificate file (*.pem format only) used for TLS connections. It contains
private key for client and signed certificate for the server. This file will be renamed
as "TLS.pem" automatically.
Note: The size of the uploaded certificate file must be under 2MB.
This file must be named with the CA subject name hash value. It contains CA's
(Certificate Authority) public key, which is used to verify the accessed servers.
Note: The size of the uploaded CA certificate file must be under 2MB.
Display a list of files under the CA Cert directory.
SIP Settings/NAT
Table 113: SIP Settings/NAT
Configure a static IP address and port (optional) used in outbound SIP messages
if the UCM630X is behind NAT. If it is a host name, it will only be looked up once.
If enabled, the SDP connection will use the IP address resolved from the external
host.
Configure externally mapped UDP port when the PBX is behind a static NAT or
PAT.
Configure the externally mapped TCP port when the UCM630X is behind a static
NAT or PAT.
To Next Page
Loading...
Need help?
General
