Grandstream Networks UCM630X Series - Figure 58: Email Logs; Table 26: Email Codes

P a g e | 124
UCM630X Series User Manual
Version 1.0.11.10
CDR
Test
Email logs will be shown at bottom of the “Email Send Log” page, as shown in the following figure.
Figure 58: Email Logs
Below are the codes returned when sending emails and their description:
Table 26: Email Codes
Code
Description
250
Mail sent successfully
501
Address format parsing error, 501 will be returned when there are
unacceptable characters in the recipient's email address in MTA mode.
Please check if the recipient's email address format is correct. The
"sender" configured on the client is your mail account.
535
The username and password verification in the client mode is incorrect.
Please check whether the username and password are configured
correctly.