Grandstream Networks UCM630X Series User Manual

P a g e | 293
UCM630X Series User Manual
Version 1.0.11.10
Table 71: FAX/T.38 Settings
Enable Error
Correction Mode
Configure to enable Error Correction Mode (ECM) for the Fax.
The default setting is "Yes".
Maximum Transfer
Rate
Configure the maximum transfer rate during the Fax rate negotiation.
The possible values are 2400, 4800, 7200, 9600, 12000, and 14400.
The default setting is 14400.
Minimum Transfer Rate
Configure the minimum transfer rate during the Fax rate negotiation. The
possible values are 2400, 4800, 7200, 9600, 12000, and 14000. The default
setting is 2400.
Max Concurrent
Sending Fax
Configure the concurrent fax that can be sent by UCM6300. Two modes “Only”
and “More” are supported.
• Only
Under this mode, the UCM6300 allows only a single user to send a fax at a
time.
• More
Under this mode, the UCM6300 supports multiple concurrent faxes sending
by the users.
By default, this option is set to “only”.
Fax Queue Length
Configure the maximum length of Fax Queue from 6 to 10.
The default setting is 6.
User Information in Fax
Header
If enabled, this will give users the option to send a special header in SIP fax
messages.
Fax Header Information
Adds fax header into the fax file.
Default Email Address
Configure the Email address to send the received Fax to if the user's Email
address cannot be found.

Grandstream Networks UCM630X Series Specifications

General

Brand	Grandstream Networks
Model	UCM630X Series
Category	Conference System
Language	English