Grandstream Networks UCM630X Series - Openvpn; Table 14: UCM630 X System Settings→Network Settings→Openvpn

P a g e | 90
UCM630X Series User Manual
Version 1.0.11.10
OpenVPN®
OpenVPN® settings allow the users to configure UCM630X to use VPN features, the following table gives details
about the various options to configure the UCM as OpenVPN Client.
Table 14: UCM630X System Settings→Network Settings→OpenVPN®
OpenVPN®
Enable
Enable / Disable the OpenVPN® feature.
Configuration
Method
Select the OpenVPN® configuration method.
Manual Configuration: Allows to configure OpenVPN® settings manually.
Upload Configuration File: Allows to upload .ovpn and .conf files to the UCM
and to automatically configure OpenVPN® settings.
OpenVPN®
Server Address
Configures the hostname/IP and port of the server. For example 192.168.1.2:22
OpenVPN®
Server Protocol
Specify the protocol user, user should use the same settings as used on the
server
OpenVPN®
Device mode
Use the same setting as used on the server.
• Dev TUN: Create a routed IP tunnel.
• Dev TAP: Create an Ethernet tunnel.
OpenVPN® Use
Compression
Compress tunnel packets using the LZO algorithm on the VPN link. Do not
enable this unless it is also enabled in the server config file.
Enable Weak
SSL Ciphers
Either to enable the Weak SSL ciphers or not.
OpenVPN®
Encryption
Algorithm
Specify the cryptographic cipher. Users should make sure to use the same
setting that they are using on the OpenVPN server.
OpenVPN® CA
Cert
Upload as SSL/TLS root certificate. This file will be renamed as ‘ca.crt’
automatically.