Grandstream Networks UCM630X Series - Figure 115: Create New PIN Group; Figure 116: PIN Members; Figure 117: Outbound PIN

P a g e | 274
UCM630X Series User Manual
Version 1.0.11.10
Figure 115: Create New PIN Group
The following screenshot shows an example of created PIN Groups and members:
Figure 116: PIN Members
Note:
If PIN group is enabled on outbound route level, password, privilege level and enable the filter on source caller
ID will be disabled, unless if you check the option “PIN Groups with Privilege Level” where you can use the
PIN Groups and Privilege Level or PIN Groups and Enable Filter on Source Caller ID.
Figure 117: Outbound PIN