Grandstream Networks UCM630X Series User Manual

P a g e | 443
UCM630X Series User Manual
Version 1.0.11.10
On the UCM630X, users have the following options when select the categories to copy the files to the external
device:
- Recording Files: Copy the normal recording files to the external device.
- Conference: Copy the conference recording files to the external device.
- Queue: Copy the call queue recording files to the external device.
- All: Copy all recording files to the external device.
PBX Settings/NAS
The UCM supports adding and backing up recordings to a network-attached storage (NAS) server. Following
table describes NAS settings:
Table 108: NAS Settings
Enable
Enabled / Disable the NAS recording functionality.
Host
Configure the Domain or IP address of the NAS server.
Note: Currently, only IP addresses are supported in the Host/IP field.
Share Name
Specify the name of the shared folder.
Username
Specify the account username to access the NAS server.
Password
Configure the account password to access the NAS server.
Security Mode
Select a security mode based on the server settings to ensure proper
connection establishment. The default value is ntlmssp.
Status
If configured correctly, the Status field will show “Mounted”, and the newly
added NAS server will be shown on the Mounted Netdisk List. Additionally, the
NAS will appear as a selectable storage option in the PBX Settings→Recording
Storage page and CDR→Recording Files page.

Grandstream Networks UCM630X Series Specifications

General

Brand	Grandstream Networks
Model	UCM630X Series
Category	Conference System
Language	English