Security Settings
The UCM630X provides users firewall security configurations to prevent certain malicious attacks to the
UCM630X system. Users could configure to allow, restrict, or reject specific traffic through the device for security
and bandwidth purpose. The UCM630X also provides the Fail2ban feature for authentication errors in SIP
REGISTER, INVITE and SUBSCRIBE. To configure firewall settings in the UCM630X, go to Web GUI→System
Settings→Security Settings page.
Static Defense
Under Web GUI→System Settings→Security Settings→Static Defense page, users will see the following
information:
• Current service information with port, process, and type.
• Typical firewall settings.
• Custom firewall settings.
The following table shows a sample current service status running on the UCM630X.
Table 15: UCM630X Firewall→Static Defense→Current Service
To Next Page
Loading...
Need help?
General
