Figure 76: Edit Device
A preview of the “Advanced” settings is shown in the above figure. There are five levels configurations as
described in (1) (2) (3) (4) (5) below, with priority from the lowest to the highest. The configurations in all levels
will take effect for the device. If the same options are existing in different level configurations with different values
configured, the higher-level configuration will override the lower-level configuration.
(1) Global Policy
This is the lowest level configuration. The global policy configured in Web GUI→Value-added
Features→Zero Config→Global Policy will be applied here. Clicking on “Modify Global Policy” to
redirect to page Value-added Features→Zero Config→Global Policy.
(2) Global Templates
Select a global template to be used for the device and click on to add. Multiple global templates
can be selected, and users can arrange the priority by adjusting orders via and . All the selected
To Next Page
Loading...
Need help?
General
