Customize Specific Prompt
On the UCM630X, if the user needs to replace some specific customized prompt, the user can upload a single
specific customized prompt from Web GUI→PBX Settings→Voice Prompt→Language Settings and click on
“Upload” instead of the entire language pack.
Figure 167: Upload Single Voice Prompt for Entire Language Pack
Username Prompt Customization
There are two ways to customize/set new username prompt:
Upload Username Prompt File from Web GUI
1. First, Users should have a pre-recorded file respecting the following format:
• PCM encoded / 16 bits / 8000Hz mono.
• In .tar/.tar.gz/.tgz format
• File size under 30M.
• Filename must be set as the extension number with 18 characters max. For example, the recorded
file name 1000.wav will be used for extension 1000.
2. Go under web GUI PBX Settings → Voice Prompt → Username Prompt and click on ”Upload”
button.
3. Select the recorded file to upload it and press Save and Apply Settings.
To Next Page
Loading...
Need help?
General
