User could also filter the operation logs by time condition, IP address and/or username. Configure these
conditions and then click on ”Display Filter”.
Figure 348: Operation Logs Filter
The above figure shows an example that operations made by user “support” on device with IP 192.168.40.173
from 2014-11-01 00:00 to 2014-11-06 15:38 are filtered out and displayed.
To delete operation logs, users can perform filtering first and then click on to delete
the filtered result of operation logs. Or users can click on to delete all operation logs at once.
Upgrading
The UCM630X can be upgraded to a new firmware version locally. And in order to do that, please follow the
below steps:
1. Download the latest UCM630X firmware file from the following link and save it in your PC.
https://www.grandstream.com/support/firmware
2. Log in the Web GUI as administrator in the PC.
3. Go to Web GUI→Maintenance→Upgrade, upload the firmware file by clicking on “choose file to upload”
To Next Page
Loading...
