• Click on to delete the inbound route.
Inbound Rule Configurations
Table 70: Inbound Rule Configuration Parameters
• All patterns are prefixed with the "_".
• Special characters:
X: Any Digit from 0-9.
Z: Any Digit from 1-9.
N: Any Digit from 2-9.
".": Wildcard. Match one or more characters.
"!": Wildcard. Match zero or more characters immediately.
Example: [12345-9] - Any digit from 1 to 9.
• The pattern can be composed of two parts, Pattern, and CallerID
Pattern. The first part is used to specify the dialed number while the
second part is used to specify the caller ID and it is optional, if set it
means only the extension with the specific caller ID can call in or call out.
For example, pattern '_2XXX/1234' means the only extension with the
caller ID '1234' can use this rule.
Note:
• Multiple patterns can be used. Each pattern should be entered in a new
line.
• Users can add comments to the end of patterns to better organize and
keep track of complex rules by typing “/*” and “*/” before and after
each comment respectively
To Next Page
Loading...
Need help?
General
