5. Once successfully configured, the incoming Fax from external Fax machine to the PSTN line number will be
converted to PDF+Tiff file and sent to the extension 7200 and email address fax@domain.local as
attachment.
Note: In order for the file to be sent to the email address configured on the external extension, please make sure
that the email settings are well configured. Please refer to [
Email Settings] section.
Figure 140: List of Fax Files
FAX Sending
Besides the support of Fax machines, The UCM6300 supports also sending Fax via Web GUI access. This
feature can be found on Web GUI→Value-added Features→Fax Sending page. To send fax, pre-setup for
analog trunk and outbound route is required. Please refer to [ANALOG TRUNKS], [VOIP TRUNKS] and [Outbound
Routes] sections for configuring analog trunk and outbound route.
After making sure analog trunk or VoIP Trunk is setup properly and UCM6300 can reach out to PSTN numbers
via the trunk, on Fax Sending page, enter the fax number and upload the file to be faxed. Then click on “Send”
to start. The progress of sending fax will be displayed in Web GUI. Users can also view the sending history is in
the same web page.
To Next Page
Loading...
Need help?
General
