UCM630X Series User Manual
Version 1.0.11.10
the default ring timeout is 60 seconds on the UCM630X, which can be configured in
the global ring timeout setting under Web GUI→PBX Settings→Voice
Prompt→Custom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the endpoint also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recordings can be accessed under Web GUI→CDR→Recording Files.
• If set to “yes”, users can skip entering the password when making outbound calls.
• If set to “By Time”, users can skip entering the password when making outbound
calls during the selected time condition.
• If set to “No”, users will be asked to enter the password when making outbound
calls.
Time Condition for
Skip Trunk Auth
If ‘Skip Trunk Auth’ is set to ‘By Time’, select a time condition during which users can
skip entering a password when making outbound calls.
Configure personal password when making outbound calls via the trunk.
If enabled, the extension will be added to the LDAP Phonebook PBX list.
Specify which Music On Hold class to suggest to the bridged channel when putting
them on hold.
Check to enable and set the call limit the duration.
Maximum Call
Duration (s)
The maximum call duration (in seconds). The default value 0 means no limit. Max
value is 86400 seconds
Batch Extension Resetting Functionality
Users can select multiple extensions and reset their settings to default by pressing the reset button
and confirming the reset functionality. Once done, all settings on the Basic Settings page will be restored to
default values except for Concurrent Registrations. User voicemail password will be reset to Random Password.
To Next Page
Loading...
Need help?
General
