UCM630X Series User Manual
Version 1.0.11.10
Announcements Center Settings
Table 137: Announcements Center Settings
Configure a name for the newly created Announcements Center to identify this
announcement center.
Enter a code number for the custom prompt. This code will be used in
combination with the group number. For example, if the code is 55, and group
number is 666. The user can dial 55666 to send prompt 55 to all members in
group 666.
Note: The combination number must not conflict with any number in the system
such as extension number or conference number.
This option is to set a custom prompt as an announcement to notify group
members. The file can be uploaded from page ‘Custom Prompt’. Click ‘Prompt’
to add additional record.
Configure the ring timeout for the group members. The default value is 30
seconds.
If set to Yes, the Auto answer will be enabled by the members.
Group Settings
Table 138: Group Settings
Configure a name for the newly created group to identify the group.
Note: Name cannot exceed 64 characters.
Configure the group number. The group number is used in combination with the
code. For example, if group number is 666, and code is 55. The user can dial
55666 to send prompt 55 to all members in group 666.
Note: The combination number must not conflict with any number in the system
such as extension number or conference number and cannot exceed 64
characters.
Select the group members from the available list.
To Next Page
Loading...
Need help?
General
