Grandstream Networks UCM630X Series - Table 52: FXS Extension Configuration Parameters→Follow Me

P a g e | 198
UCM630X Series User Manual
Version 1.0.11.10
Specific Time
Time Condition
Click to add Time Condition to configure a specific time for this extension.
Table 52: FXS Extension Configuration Parameters→Follow Me
Follow Me
Enable
Configure to enable or disable Follow Me for this user.
Skip Trunk Auth
If the outbound calls need to check the password, we should enable this option or
enable the option "Skip Trunk Auth" of the Extension. Otherwise, this Follow Me
cannot call out.
Music On Hold
Class
Configure the Music On Hold class that the caller would hear while tracking the user.
Confirm When
Answering
If enabled, call will need to be confirmed after answering.
Enable
Destination
Configure to enable destination.
Default
Destination
The call will be routed to this destination if no one in the Follow Me answers the call.
Use Callee DOD
for Follow Me
Use the callee DOD number as CID if configured Follow Me numbers are external
numbers.
Play Follow Me
Prompt
If enabled, the Follow Me prompt tone will be played.
New Follow Me
Number
Add a new Follow Me number which could be a "Local Extension" or an "External
Number". The selected dial plan should have permissions to dial the defined external
number.
Dialing Order
This is the order in which the Follow Me destinations will be dialed to reach the user.