Grandstream Networks UCM630X Series - Table 133: Create New Mini Bar; Table 134: Create New Maid; Figure 284: Create New Maid

P a g e | 500
UCM630X Series User Manual
Version 1.0.11.10
Table 133: Create New Mini Bar
Code
Enter a non-existing extension number to be dialed when
using the mini bar feature.
Name
Enter a name for the mini bar.
Prompt
Select the Prompt to play once connected to the mini bar.
Skip Maid and Password
Authentication
If enabled, the default maid code will be 0000, no
authentication is required. (Enter 0000 followed by # to access
the consumer goods)
Enable Continuous Multi Goods
Billing
If enabled, please separate the goods’ codes by*.
In order to create a new maid, click on under UCM WebGUI→Value-added
Features→PMS→Maid.
Figure 284: Create New Maid
Table 134: Create New Maid
Maid Code
Enter the Code to use when the maid wants to use the Mini Bar.
Password
Enter the password associated with the maid.
In order to create a new consumer goods, click on under UCM WebGUI→Value-
added Features→PMS→Mini Bar, the following window will popup.