UCM630X Series User Manual
Version 1.0.11.10
Enable SRTP for the VoIP trunk. The default setting is "No".
Enable or disable T.38 UDPTL support.
Block disturbance calls, this function needs to be supported by the opposite end.
If enabled, the system will automatically alert the user when a called party is
available, given that a previous call to that party failed for some reason.
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC
requests this channel is allowed to make. The minimum value is 1.
Configure the maximum number of monitor structures that may be created for this
device. In other words, this number tells how many callers may request CC
services for a specific device at one time. The minimum value is 1.
Table 62: SIP Peer Trunk Configuration Parameters
Configure a unique label to identify this trunk when listed in outbound rules,
inbound rules, etc.
Configure the IP address or URL for the VoIP provider’s server of the trunk.
Enable automatic recording for the calls using this trunk (for SIP trunk only). The
default setting is disabled. The recording files can be accessed under Web
GUI→CDR→Recording Files.
Keep the CID from the inbound call when dialing out, this setting will override the
“Keep Trunk CID” option. Please make sure that the peer PBX at the other side
supports to match user entry using the “username” field from the authentication
line.
If enabled, the trunk CID will not be overridden by the extension’s CID when the
extension has CID configured. The default setting is “No”.
To Next Page
Loading...
Need help?
General
