• Changing Display Name
• Set Station Restriction
• Call forwarding
• DND
• Name Change
• MWI
Note:
1. Added support for receiving HTTP GET keep-alive messages from HSC PMS. This will allow the PMS
to be aware of its connection to the UCM and take the appropriate actions such as raising alarms,
sending notifications, etc.
2. Added support for HTTP GET requests from HSC PMS to retrieve UCM extension information. UCM
can provide the following information:
• extension – UCM extension number
• name – extension display name / CID name
• mwi – MWI state
• permission – permission level of the extension
• cfwt – call forwarding always number
• dnd – DND state
• language – display language of the extension in ISO 639-1 format
The UCM should respond with either 200 OK or 404 responses.
3. Added HTTPS support
The following figure illustrates the communication flow between the PBX (Grandstream UCM6xxx Series) and
PMS software (HSC). The communication between both parties is direct with no middleware.
To Next Page
Loading...
Need help?
General
