1002 Command Reference for x230 Series Edge Switches C613-50055-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LOCAL RADIUS SERVER COMMANDS
CLEAR
RADIUS LOCAL-SERVER STATISTICS
clear radius local-server statistics
Overview Use this command to clear the statistics stored on the device for the local RADIUS
server.
Use this command without any parameters to clear all types of local RADIUS server
statistics.
Syntax
clear radius local-server statistics [nas|server|user]
Mode Privileged Exec
Usage Refer to the sample output for the show radius local-server statistics for further
information about the type of statistics each parameter option for this command
clears. Both the nas and server parameters clear unknown username and invalid
passwords statistics, while the user parameter clears the number of successful
and failed logins for each local RADIUS server user.
Examples To clear the NAS (Network Access Server) statistics stored on the device, use the
command:
awplus# clear radius local-server statistics nas
To clear the local RADIUS server statistics stored on the device, use the command:
awplus# clear radius local-server statistics server
To clear the local RADIUS server user statistics stored on the device, use the
command:
awplus# clear radius local-server statistics user
Related
Commands
show radius local-server statistics
Parameter Description
nas Clear the NAS (Network Access Server) statistics on the device. For
example, clearing statistics stored for NAS server invalid
passwords.
server Clear the Local RADIUS Server statistics on the device. For example,
clearing Local RADIUS Servers statistics for all failed login attempts.
user Clear the Local RADIUS Server user statistics. For example, clearing
statistics stored for the number of successful user logins.
To Next Page
Loading...
Need help?
General
