Allied Telesis AlliedWare Plus AT-x230-10GP - Show Running-Config Dhcp

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 149
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
FILE MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG DHCP
show running-config dhcp
Overview Use this command to display the running configuration for DHCP server, DHCP
snooping, and DHCP relay.
Syntax
show running-config dhcp
Mode Privileged Exec and Global Configuration
Example To display to display the running configuration for DHCP server, DHCP snooping,
and DHCP relay:
awplus# show running-config dhcp
Output Figure 3-12: Example output from the show running-config dhcp command
Related
Commands
copy running-config
show running-config
!
#show running-config dhcp
no service dhcp-server
!
service dhcp-snooping
!
interface port1.0.1
ip dhcp snooping trust
!
interface port1.0.3
ip dhcp snooping max-bindings 25
access-group dhcpsnooping
!
interface port1.0.4
ip dhcp snooping max-bindings 25
access-group dhcpsnooping
!
interface po1
ip dhcp snooping max-bindings 25
arp security violation log
!
interface sa1
ip dhcp snooping max-bindings 25
access-group dhcpsnooping
arp security violation log
!
interface vlan100
ip dhcp snooping
arp security
!
interface vlan200
ip dhcp snooping
arp security
!