Allied Telesis AlliedWare Plus AT-x230-10GP User Manual

C613-50055-01 REV A Command Reference for x230 Series Edge Switches 1457
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
TRIGGER COMMANDS
DEBUG
TRIGGER
debug trigger
Overview This command enables trigger debugging. This generates detailed messages
about how your device is processing the trigger commands and activating the
triggers.
The no variant of this command disables trigger debugging.
Syntax
debug trigger
no debug trigger
Mode Privilege Exec
Examples To start trigger debugging, use the command:
awplus# debug trigger
To stop trigger debugging, use the command:
awplus# no trigger
Related
Commands
show debugging trigger
show trigger
test
trigger
undebug trigger

Allied Telesis AlliedWare Plus AT-x230-10GP Specifications

General

Brand	Allied Telesis
Model	AlliedWare Plus AT-x230-10GP
Category	Switch
Language	English